Dial Throttle is a handheld throttle built on the M5Stack Dial, an ESP32-S3 board with a round touchscreen and a rotary knob. It connects over WiFi to a JMRI WiThrottle server or to an LCC GridConnect server as an OpenLCB node.

Running a Train

The knob works in notches, with a choice of 4, 8, 12 or 16, spread across speed steps 0–126. Reverse is capped at half the notches by default. Pressing the touchscreen brakes the loco, and pressing the dial button stops it, or reverses it if it is already stopped.

Keypad and RFID

A SparkFun Qwiic keypad adds keys for functions, turnouts and loco selection. You can also pick a loco by tapping an RFID tag. The tag is looked up in a MySQL table or a local map, or its UID is used directly.

Battery

To save power, the throttle dims the display, turns it off, suspends WiFi and finally powers off, but never while the train is moving. WiFi, server and throttle settings are kept in flash and can be edited on the device.