UTrack

Parametric N scale track

Print the exact piece your layout needs.

Set a length or a curve, check it in 3D, then download print-ready STLs. Everything runs in your browser; nothing is uploaded.

Piece

Underside label
Ties
Tie spacing

Each end always gets two plain ties over the joiner pocket. The ties with rail clips between them are spaced evenly, as close to the target as a whole number of gaps allows.

Preview colors
Download

Loading renderer…
 
Renderer log

    

Printing

The roadbed prints flat on its underside with no supports. For two colors, download the two-color 3MF: it opens in your slicer as one object with a roadbed part and a ties part, ready to assign a filament to each. With one filament, use the single-piece STL.

The rail clips are fine features. Printing ties on their sides draws each clip in a single layer instead of stacking it from thin layers, which makes them much tougher. Each loose tie has two split, barbed pegs that push through slots in the roadbed and click under the grooves on the underside.

Fitting rail

Each end has a joiner pocket and two channels for metal rail joiners, and the clips on the ties hold the rail foot. Rail profiles vary between brands, so print a short straight first and check the fit against your rail and existing track before printing a batch.

Run it yourself

The generator is a single OpenSCAD file. Open it in OpenSCAD and use the Customizer, or render from the command line:

openscad -o roadbed.stl -D 'part="roadbed"' utrack.scad
openscad -o ties.stl -D 'part="ties"' utrack.scad