HAL configuration file. More...

#include "stm32f3xx_hal_def.h"
#include "stm32f3xx_hal_rcc.h"
#include "stm32f3xx_hal_gpio.h"
#include "stm32f3xx_hal_dma.h"
#include "stm32f3xx_hal_cortex.h"
#include "stm32f3xx_hal_adc.h"
#include "stm32f3xx_hal_can.h"
#include "stm32f3xx_hal_cec.h"
#include "stm32f3xx_hal_comp.h"
#include "stm32f3xx_hal_crc.h"
#include "stm32f3xx_hal_dac.h"
#include "stm32f3xx_hal_flash.h"
#include "stm32f3xx_hal_sram.h"
#include "stm32f3xx_hal_nor.h"
#include "stm32f3xx_hal_nand.h"
#include "stm32f3xx_hal_pccard.h"
#include "stm32f3xx_hal_hrtim.h"
#include "stm32f3xx_hal_i2c.h"
#include "stm32f3xx_ll_i2c.h"
#include "stm32f3xx_hal_i2s.h"
#include "stm32f3xx_hal_irda.h"
#include "stm32f3xx_hal_iwdg.h"
#include "stm32f3xx_hal_opamp.h"
#include "stm32f3xx_hal_pcd.h"
#include "stm32f3xx_hal_pwr.h"
#include "stm32f3xx_hal_rtc.h"
#include "stm32f3xx_hal_sdadc.h"
#include "stm32f3xx_hal_smartcard.h"
#include "stm32f3xx_hal_smbus.h"
#include "stm32f3xx_hal_spi.h"
#include "stm32f3xx_hal_tim.h"
#include "stm32f3xx_hal_tsc.h"
#include "stm32f3xx_hal_uart.h"
#include "stm32f3xx_hal_usart.h"
#include "stm32f3xx_hal_wwdg.h"

Macros
#define	HAL_MODULE_ENABLED
	This is the list of modules to be used in the HAL driver.

#define	HAL_ADC_MODULE_ENABLED
	Enable module.

#define	HAL_CAN_MODULE_ENABLED
	Enable module.

#define	HAL_CEC_MODULE_ENABLED
	Enable module.

#define	HAL_COMP_MODULE_ENABLED
	Enable module.

#define	HAL_CORTEX_MODULE_ENABLED
	Enable module.

#define	HAL_CRC_MODULE_ENABLED
	Enable module.

#define	HAL_DAC_MODULE_ENABLED
	Enable module.

#define	HAL_DMA_MODULE_ENABLED
	Enable module.

#define	HAL_FLASH_MODULE_ENABLED
	Enable module.

#define	HAL_SRAM_MODULE_ENABLED
	Enable module.

#define	HAL_NOR_MODULE_ENABLED
	Enable module.

#define	HAL_NAND_MODULE_ENABLED
	Enable module.

#define	HAL_PCCARD_MODULE_ENABLED
	Enable module.

#define	HAL_GPIO_MODULE_ENABLED
	Enable module.

#define	HAL_HRTIM_MODULE_ENABLED
	Enable module.

#define	HAL_I2C_MODULE_ENABLED
	Enable module.

#define	HAL_I2S_MODULE_ENABLED
	Enable module.

#define	HAL_IRDA_MODULE_ENABLED
	Enable module.

#define	HAL_IWDG_MODULE_ENABLED
	Enable module.

#define	HAL_OPAMP_MODULE_ENABLED
	Enable module.

#define	HAL_PCD_MODULE_ENABLED
	Enable module.

#define	HAL_PWR_MODULE_ENABLED
	Enable module.

#define	HAL_RCC_MODULE_ENABLED
	Enable module.

#define	HAL_RTC_MODULE_ENABLED
	Enable module.

#define	HAL_SDADC_MODULE_ENABLED
	Enable module.

#define	HAL_SMARTCARD_MODULE_ENABLED
	Enable module.

#define	HAL_SMBUS_MODULE_ENABLED
	Enable module.

#define	HAL_SPI_MODULE_ENABLED
	Enable module.

#define	HAL_TIM_MODULE_ENABLED
	Enable module.

#define	HAL_TSC_MODULE_ENABLED
	Enable module.

#define	HAL_UART_MODULE_ENABLED
	Enable module.

#define	HAL_USART_MODULE_ENABLED
	Enable module.

#define	HAL_WWDG_MODULE_ENABLED
	Enable module.

#define	UNUSED(x) ((void)((uint32_t)(x)))

#define	HSE_VALUE ((uint32_t)8000000)
	Adjust the value of External High Speed oscillator (HSE) used in your application.

#define	HSE_STARTUP_TIMEOUT ((uint32_t)5000)
	In the following line adjust the External High Speed oscillator (HSE) Startup Timeout value.

#define	HSI_VALUE ((uint32_t)8000000)
	Internal High Speed oscillator (HSI) value.

#define	HSI_STARTUP_TIMEOUT ((uint32_t)5000)
	In the following line adjust the Internal High Speed oscillator (HSI) Startup Timeout value.

#define	LSI_VALUE ((uint32_t)40000)
	Internal Low Speed oscillator (LSI) value.

#define	LSE_VALUE ((uint32_t)32768)
	External Low Speed oscillator (LSE) value.

#define	LSE_STARTUP_TIMEOUT 5000U
	Time out for LSE start up value in ms.

#define	EXTERNAL_CLOCK_VALUE ((uint32_t)8000000)
	External clock source for I2S peripheral This value is used by the I2S HAL module to compute the I2S clock source frequency, this source is inserted directly through I2S_CKIN pad.

#define	VDD_VALUE ((uint32_t)3300)
	This is the HAL system configuration section.

#define	TICK_INT_PRIORITY ((uint32_t)(1<<__NVIC_PRIO_BITS) - 1)

#define	USE_RTOS 0
	Do not use the stm32 HAL's RTOS features. (btw: why?)

#define	PREFETCH_ENABLE 1
	Enable flash prefetch.

#define	INSTRUCTION_CACHE_ENABLE 0
	We do not have an instruction cache in stm32f3 (sure?)

#define	DATA_CACHE_ENABLE 0
	We do not have a data cache in stm32f3 (sure?)

#define	assert_param(expr) ((void)0)
	Uncomment the line below to expanse the "assert_param" macro in the HAL drivers code.

Functions
static void	SetInterruptPriority (uint32_t irq, uint8_t priority)

Detailed Description

HAL configuration file.

Author: MCD Application Team

Version: V1.1.1

Date: 19-June-2015

Attention

© COPYRIGHT(c) 2015 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file stm32f3xx_hal_conf.h.

Macro Definition Documentation

◆ assert_param

#define assert_param ( expr ) ((void)0)

Uncomment the line below to expanse the "assert_param" macro in the HAL drivers code.

Include module's header file

Definition at line 372 of file stm32f3xx_hal_conf.h.

◆ DATA_CACHE_ENABLE

#define DATA_CACHE_ENABLE 0

We do not have a data cache in stm32f3 (sure?)

Definition at line 211 of file stm32f3xx_hal_conf.h.

◆ EXTERNAL_CLOCK_VALUE

#define EXTERNAL_CLOCK_VALUE ((uint32_t)8000000)

External clock source for I2S peripheral This value is used by the I2S HAL module to compute the I2S clock source frequency, this source is inserted directly through I2S_CKIN pad.

External clock generated through external PLL component on EVAL 303 (based on MCO or crystal)
External clock not generated on EVAL 373 Value of the External oscillator in Hz

Definition at line 192 of file stm32f3xx_hal_conf.h.

◆ HAL_ADC_MODULE_ENABLED

#define HAL_ADC_MODULE_ENABLED

Enable module.

Definition at line 55 of file stm32f3xx_hal_conf.h.

◆ HAL_CAN_MODULE_ENABLED

#define HAL_CAN_MODULE_ENABLED

Enable module.

Definition at line 57 of file stm32f3xx_hal_conf.h.

◆ HAL_CEC_MODULE_ENABLED

#define HAL_CEC_MODULE_ENABLED

Enable module.

Definition at line 59 of file stm32f3xx_hal_conf.h.

◆ HAL_COMP_MODULE_ENABLED

#define HAL_COMP_MODULE_ENABLED

Enable module.

Definition at line 61 of file stm32f3xx_hal_conf.h.

◆ HAL_CORTEX_MODULE_ENABLED

#define HAL_CORTEX_MODULE_ENABLED

Enable module.

Definition at line 63 of file stm32f3xx_hal_conf.h.

◆ HAL_CRC_MODULE_ENABLED

#define HAL_CRC_MODULE_ENABLED

Enable module.

Definition at line 65 of file stm32f3xx_hal_conf.h.

◆ HAL_DAC_MODULE_ENABLED

#define HAL_DAC_MODULE_ENABLED

Enable module.

Definition at line 67 of file stm32f3xx_hal_conf.h.

◆ HAL_DMA_MODULE_ENABLED

#define HAL_DMA_MODULE_ENABLED

Enable module.

Definition at line 69 of file stm32f3xx_hal_conf.h.

◆ HAL_FLASH_MODULE_ENABLED

#define HAL_FLASH_MODULE_ENABLED

Enable module.

Definition at line 71 of file stm32f3xx_hal_conf.h.

◆ HAL_GPIO_MODULE_ENABLED

#define HAL_GPIO_MODULE_ENABLED

Enable module.

Definition at line 81 of file stm32f3xx_hal_conf.h.

◆ HAL_HRTIM_MODULE_ENABLED

#define HAL_HRTIM_MODULE_ENABLED

Enable module.

Definition at line 83 of file stm32f3xx_hal_conf.h.

◆ HAL_I2C_MODULE_ENABLED

#define HAL_I2C_MODULE_ENABLED

Enable module.

Definition at line 85 of file stm32f3xx_hal_conf.h.

◆ HAL_I2S_MODULE_ENABLED

#define HAL_I2S_MODULE_ENABLED

Enable module.

Definition at line 87 of file stm32f3xx_hal_conf.h.

◆ HAL_IRDA_MODULE_ENABLED

#define HAL_IRDA_MODULE_ENABLED

Enable module.

Definition at line 89 of file stm32f3xx_hal_conf.h.

◆ HAL_IWDG_MODULE_ENABLED

#define HAL_IWDG_MODULE_ENABLED

Enable module.

Definition at line 91 of file stm32f3xx_hal_conf.h.

◆ HAL_MODULE_ENABLED

#define HAL_MODULE_ENABLED

This is the list of modules to be used in the HAL driver.

Definition at line 53 of file stm32f3xx_hal_conf.h.

◆ HAL_NAND_MODULE_ENABLED

#define HAL_NAND_MODULE_ENABLED

Enable module.

Definition at line 77 of file stm32f3xx_hal_conf.h.

◆ HAL_NOR_MODULE_ENABLED

#define HAL_NOR_MODULE_ENABLED

Enable module.

Definition at line 75 of file stm32f3xx_hal_conf.h.

◆ HAL_OPAMP_MODULE_ENABLED

#define HAL_OPAMP_MODULE_ENABLED

Enable module.

Definition at line 93 of file stm32f3xx_hal_conf.h.

◆ HAL_PCCARD_MODULE_ENABLED

#define HAL_PCCARD_MODULE_ENABLED

Enable module.

Definition at line 79 of file stm32f3xx_hal_conf.h.

◆ HAL_PCD_MODULE_ENABLED

#define HAL_PCD_MODULE_ENABLED

Enable module.

Definition at line 95 of file stm32f3xx_hal_conf.h.

◆ HAL_PWR_MODULE_ENABLED

#define HAL_PWR_MODULE_ENABLED

Enable module.

Definition at line 97 of file stm32f3xx_hal_conf.h.

◆ HAL_RCC_MODULE_ENABLED

#define HAL_RCC_MODULE_ENABLED

Enable module.

Definition at line 99 of file stm32f3xx_hal_conf.h.

◆ HAL_RTC_MODULE_ENABLED

#define HAL_RTC_MODULE_ENABLED

Enable module.

Definition at line 101 of file stm32f3xx_hal_conf.h.

◆ HAL_SDADC_MODULE_ENABLED

#define HAL_SDADC_MODULE_ENABLED

Enable module.

Definition at line 103 of file stm32f3xx_hal_conf.h.

◆ HAL_SMARTCARD_MODULE_ENABLED

#define HAL_SMARTCARD_MODULE_ENABLED

Enable module.

Definition at line 105 of file stm32f3xx_hal_conf.h.

◆ HAL_SMBUS_MODULE_ENABLED

#define HAL_SMBUS_MODULE_ENABLED

Enable module.

Definition at line 107 of file stm32f3xx_hal_conf.h.

◆ HAL_SPI_MODULE_ENABLED

#define HAL_SPI_MODULE_ENABLED

Enable module.

Definition at line 109 of file stm32f3xx_hal_conf.h.

◆ HAL_SRAM_MODULE_ENABLED

#define HAL_SRAM_MODULE_ENABLED

Enable module.

Definition at line 73 of file stm32f3xx_hal_conf.h.

◆ HAL_TIM_MODULE_ENABLED

#define HAL_TIM_MODULE_ENABLED

Enable module.

Definition at line 111 of file stm32f3xx_hal_conf.h.

◆ HAL_TSC_MODULE_ENABLED

#define HAL_TSC_MODULE_ENABLED

Enable module.

Definition at line 113 of file stm32f3xx_hal_conf.h.

◆ HAL_UART_MODULE_ENABLED

#define HAL_UART_MODULE_ENABLED

Enable module.

Definition at line 115 of file stm32f3xx_hal_conf.h.

◆ HAL_USART_MODULE_ENABLED

#define HAL_USART_MODULE_ENABLED

Enable module.

Definition at line 117 of file stm32f3xx_hal_conf.h.

◆ HAL_WWDG_MODULE_ENABLED

#define HAL_WWDG_MODULE_ENABLED

Enable module.

Definition at line 119 of file stm32f3xx_hal_conf.h.

◆ HSE_STARTUP_TIMEOUT

#define HSE_STARTUP_TIMEOUT ((uint32_t)5000)

In the following line adjust the External High Speed oscillator (HSE) Startup Timeout value.

Time out for HSE start up, in ms

Definition at line 142 of file stm32f3xx_hal_conf.h.

◆ HSE_VALUE

#define HSE_VALUE ((uint32_t)8000000)

Adjust the value of External High Speed oscillator (HSE) used in your application.

This value is used by the RCC HAL module to compute the system frequency (when HSE is used as system clock source, directly or through the PLL).
Value of the External oscillator in Hz

Definition at line 134 of file stm32f3xx_hal_conf.h.

◆ HSI_STARTUP_TIMEOUT

#define HSI_STARTUP_TIMEOUT ((uint32_t)5000)

In the following line adjust the Internal High Speed oscillator (HSI) Startup Timeout value.

Time out for HSI start up

Definition at line 159 of file stm32f3xx_hal_conf.h.

◆ HSI_VALUE

#define HSI_VALUE ((uint32_t)8000000)

Internal High Speed oscillator (HSI) value.

This value is used by the RCC HAL module to compute the system frequency (when HSI is used as system clock source, directly or through the PLL). Value of the Internal oscillator in Hz

Definition at line 151 of file stm32f3xx_hal_conf.h.

◆ INSTRUCTION_CACHE_ENABLE

#define INSTRUCTION_CACHE_ENABLE 0

We do not have an instruction cache in stm32f3 (sure?)

Definition at line 209 of file stm32f3xx_hal_conf.h.

◆ LSE_STARTUP_TIMEOUT

#define LSE_STARTUP_TIMEOUT 5000U

Time out for LSE start up value in ms.

Time out for LSE start up, in ms

Definition at line 181 of file stm32f3xx_hal_conf.h.

◆ LSE_VALUE

#define LSE_VALUE ((uint32_t)32768)

External Low Speed oscillator (LSE) value.

< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature.
Value of the External Low Speed oscillator in Hz

Definition at line 174 of file stm32f3xx_hal_conf.h.

◆ LSI_VALUE

#define LSI_VALUE ((uint32_t)40000)

Internal Low Speed oscillator (LSI) value.

Definition at line 166 of file stm32f3xx_hal_conf.h.

◆ PREFETCH_ENABLE

#define PREFETCH_ENABLE 1

Enable flash prefetch.

Definition at line 207 of file stm32f3xx_hal_conf.h.

◆ TICK_INT_PRIORITY

#define TICK_INT_PRIORITY ((uint32_t)(1<<__NVIC_PRIO_BITS) - 1)

tick interrupt priority (lowest by default)

Definition at line 203 of file stm32f3xx_hal_conf.h.

◆ UNUSED

#define UNUSED ( x ) ((void)((uint32_t)(x)))

Definition at line 124 of file stm32f3xx_hal_conf.h.

◆ USE_RTOS

#define USE_RTOS 0

Do not use the stm32 HAL's RTOS features. (btw: why?)

Definition at line 205 of file stm32f3xx_hal_conf.h.

◆ VDD_VALUE

#define VDD_VALUE ((uint32_t)3300)

This is the HAL system configuration section.

Value of VDD in mv

Definition at line 202 of file stm32f3xx_hal_conf.h.

Function Documentation

◆ SetInterruptPriority()

static void SetInterruptPriority	(	uint32_t	irq,
		uint8_t	priority
	)

inlinestatic

Definition at line 375 of file stm32f3xx_hal_conf.h.

Macros

Functions

Detailed Description

© COPYRIGHT(c) 2015 STMicroelectronics

Macro Definition Documentation

◆ assert_param

◆ DATA_CACHE_ENABLE

◆ EXTERNAL_CLOCK_VALUE

◆ HAL_ADC_MODULE_ENABLED

◆ HAL_CAN_MODULE_ENABLED

◆ HAL_CEC_MODULE_ENABLED

◆ HAL_COMP_MODULE_ENABLED

◆ HAL_CORTEX_MODULE_ENABLED

◆ HAL_CRC_MODULE_ENABLED

◆ HAL_DAC_MODULE_ENABLED

◆ HAL_DMA_MODULE_ENABLED

◆ HAL_FLASH_MODULE_ENABLED

◆ HAL_GPIO_MODULE_ENABLED

◆ HAL_HRTIM_MODULE_ENABLED

◆ HAL_I2C_MODULE_ENABLED

◆ HAL_I2S_MODULE_ENABLED

◆ HAL_IRDA_MODULE_ENABLED

◆ HAL_IWDG_MODULE_ENABLED

◆ HAL_MODULE_ENABLED

◆ HAL_NAND_MODULE_ENABLED

◆ HAL_NOR_MODULE_ENABLED

◆ HAL_OPAMP_MODULE_ENABLED

◆ HAL_PCCARD_MODULE_ENABLED

◆ HAL_PCD_MODULE_ENABLED

◆ HAL_PWR_MODULE_ENABLED

◆ HAL_RCC_MODULE_ENABLED

◆ HAL_RTC_MODULE_ENABLED

◆ HAL_SDADC_MODULE_ENABLED

◆ HAL_SMARTCARD_MODULE_ENABLED

◆ HAL_SMBUS_MODULE_ENABLED

◆ HAL_SPI_MODULE_ENABLED

◆ HAL_SRAM_MODULE_ENABLED

◆ HAL_TIM_MODULE_ENABLED

◆ HAL_TSC_MODULE_ENABLED

◆ HAL_UART_MODULE_ENABLED

◆ HAL_USART_MODULE_ENABLED

◆ HAL_WWDG_MODULE_ENABLED

◆ HSE_STARTUP_TIMEOUT

◆ HSE_VALUE

◆ HSI_STARTUP_TIMEOUT

◆ HSI_VALUE

◆ INSTRUCTION_CACHE_ENABLE

◆ LSE_STARTUP_TIMEOUT

◆ LSE_VALUE

◆ LSI_VALUE

◆ PREFETCH_ENABLE

◆ TICK_INT_PRIORITY

◆ UNUSED

◆ USE_RTOS

◆ VDD_VALUE

Function Documentation

◆ SetInterruptPriority()