HAL configuration template file. This file should be copied to the application folder and renamed to stm32f1xx_hal_conf.h. More...

#include "stm32f1xx_hal_rcc.h"
#include "stm32f1xx_hal_gpio.h"
#include "stm32f1xx_hal_dma.h"
#include "stm32f1xx_hal_eth.h"
#include "stm32f1xx_hal_can.h"
#include "stm32f1xx_hal_cec.h"
#include "stm32f1xx_hal_cortex.h"
#include "stm32f1xx_hal_adc.h"
#include "stm32f1xx_hal_crc.h"
#include "stm32f1xx_hal_dac.h"
#include "stm32f1xx_hal_flash.h"
#include "stm32f1xx_hal_sram.h"
#include "stm32f1xx_hal_nor.h"
#include "stm32f1xx_hal_i2c.h"
#include "stm32f1xx_hal_i2s.h"
#include "stm32f1xx_hal_iwdg.h"
#include "stm32f1xx_hal_pwr.h"
#include "stm32f1xx_hal_rtc.h"
#include "stm32f1xx_hal_pccard.h"
#include "stm32f1xx_hal_sd.h"
#include "stm32f1xx_hal_nand.h"
#include "stm32f1xx_hal_spi.h"
#include "stm32f1xx_hal_tim.h"
#include "stm32f1xx_hal_uart.h"
#include "stm32f1xx_hal_usart.h"
#include "stm32f1xx_hal_irda.h"
#include "stm32f1xx_hal_smartcard.h"
#include "stm32f1xx_hal_wwdg.h"
#include "stm32f1xx_hal_pcd.h"
#include "stm32f1xx_hal_hcd.h"

Macros
#define	HAL_MODULE_ENABLED
	This is the list of modules to be used in the HAL driver.

#define	HAL_ADC_MODULE_ENABLED
	Enable module.

#define	HAL_CAN_MODULE_ENABLED
	Enable module.

#define	HAL_CEC_MODULE_ENABLED
	Enable module.

#define	HAL_CORTEX_MODULE_ENABLED
	Enable module.

#define	HAL_CRC_MODULE_ENABLED
	Enable module.

#define	HAL_DAC_MODULE_ENABLED
	Enable module.

#define	HAL_DMA_MODULE_ENABLED
	Enable module.

#define	HAL_ETH_MODULE_ENABLED
	Enable module.

#define	HAL_FLASH_MODULE_ENABLED
	Enable module.

#define	HAL_GPIO_MODULE_ENABLED
	Enable module.

#define	HAL_HCD_MODULE_ENABLED
	Enable module.

#define	HAL_I2C_MODULE_ENABLED
	Enable module.

#define	HAL_I2S_MODULE_ENABLED
	Enable module.

#define	HAL_IRDA_MODULE_ENABLED
	Enable module.

#define	HAL_IWDG_MODULE_ENABLED
	Enable module.

#define	HAL_NAND_MODULE_ENABLED
	Enable module.

#define	HAL_NOR_MODULE_ENABLED
	Enable module.

#define	HAL_PCCARD_MODULE_ENABLED
	Enable module.

#define	HAL_PCD_MODULE_ENABLED
	Enable module.

#define	HAL_PWR_MODULE_ENABLED
	Enable module.

#define	HAL_RCC_MODULE_ENABLED
	Enable module.

#define	HAL_RTC_MODULE_ENABLED
	Enable module.

#define	HAL_SD_MODULE_ENABLED
	Enable module.

#define	HAL_SMARTCARD_MODULE_ENABLED
	Enable module.

#define	HAL_SPI_MODULE_ENABLED
	Enable module.

#define	HAL_SRAM_MODULE_ENABLED
	Enable module.

#define	HAL_TIM_MODULE_ENABLED
	Enable module.

#define	HAL_UART_MODULE_ENABLED
	Enable module.

#define	HAL_USART_MODULE_ENABLED
	Enable module.

#define	HAL_WWDG_MODULE_ENABLED
	Enable module.

#define	HSE_VALUE ((uint32_t)8000000)
	Adjust the value of External High Speed oscillator (HSE) used in your application.

#define	HSE_STARTUP_TIMEOUT ((uint32_t)5000)

#define	HSI_VALUE ((uint32_t)8000000)
	Internal High Speed oscillator (HSI) value.

#define	LSI_VALUE ((uint32_t)40000)
	Internal Low Speed oscillator (LSI) value.

#define	LSE_VALUE ((uint32_t)32768)
	External Low Speed oscillator (LSE) value.

#define	LSE_STARTUP_TIMEOUT ((uint32_t)5000)

#define	VDD_VALUE ((uint32_t)3300)
	This is the HAL system configuration section.

#define	TICK_INT_PRIORITY ((uint32_t)0x000F)

#define	USE_RTOS 0
	Do not use the stm32 HAL's RTOS features. (btw: why?)

#define	PREFETCH_ENABLE 1
	Enable flash prefetch.

#define	MAC_ADDR0 2
	Uncomment the line below to expanse the "assert_param" macro in the HAL drivers code.

#define	MAC_ADDR1 0
	MAC accress byte 1.

#define	MAC_ADDR2 0
	MAC accress byte 2.

#define	MAC_ADDR3 0
	MAC accress byte 3.

#define	MAC_ADDR4 0
	MAC accress byte 4.

#define	MAC_ADDR5 0
	MAC accress byte 5.

#define	ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE

#define	ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE

#define	ETH_RXBUFNB ((uint32_t)8)

#define	ETH_TXBUFNB ((uint32_t)4)

#define	DP83848_PHY_ADDRESS 0x01
	DP83848 PHY Address.

#define	PHY_RESET_DELAY ((uint32_t)0x000000FF)
	PHY Reset delay these values are based on a 1 ms Systick interrupt.

#define	PHY_CONFIG_DELAY ((uint32_t)0x00000FFF)
	PHY Configuration delay.

#define	PHY_READ_TO ((uint32_t)0x0000FFFF)
	?

#define	PHY_WRITE_TO ((uint32_t)0x0000FFFF)
	?

#define	PHY_BCR ((uint16_t)0x00)

#define	PHY_BSR ((uint16_t)0x01)

#define	PHY_RESET ((uint16_t)0x8000)

#define	PHY_LOOPBACK ((uint16_t)0x4000)

#define	PHY_FULLDUPLEX_100M ((uint16_t)0x2100)

#define	PHY_HALFDUPLEX_100M ((uint16_t)0x2000)

#define	PHY_FULLDUPLEX_10M ((uint16_t)0x0100)

#define	PHY_HALFDUPLEX_10M ((uint16_t)0x0000)

#define	PHY_AUTONEGOTIATION ((uint16_t)0x1000)

#define	PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200)

#define	PHY_POWERDOWN ((uint16_t)0x0800)

#define	PHY_ISOLATE ((uint16_t)0x0400)

#define	PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020)

#define	PHY_LINKED_STATUS ((uint16_t)0x0004)

#define	PHY_JABBER_DETECTION ((uint16_t)0x0002)

#define	PHY_SR ((uint16_t)0x10)

#define	PHY_MICR ((uint16_t)0x11)

#define	PHY_MISR ((uint16_t)0x12)

#define	PHY_LINK_STATUS ((uint16_t)0x0001)

#define	PHY_SPEED_STATUS ((uint16_t)0x0002)

#define	PHY_DUPLEX_STATUS ((uint16_t)0x0004)

#define	PHY_MICR_INT_EN ((uint16_t)0x0002)

#define	PHY_MICR_INT_OE ((uint16_t)0x0001)

#define	PHY_MISR_LINK_INT_EN ((uint16_t)0x0020)

#define	PHY_LINK_INTERRUPT ((uint16_t)0x2000)

#define	assert_param(expr) ((void)0)
	Include module's header file.

Functions
static void	SetInterruptPriority (uint32_t irq, uint8_t priority)

Detailed Description

HAL configuration template file. This file should be copied to the application folder and renamed to stm32f1xx_hal_conf.h.

Author: MCD Application Team

Version: V1.0.0

Date: 15-December-2014

Attention

© COPYRIGHT(c) 2014 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file stm32f1xx_hal_conf.h.

Macro Definition Documentation

◆ assert_param

#define assert_param ( expr ) ((void)0)

Include module's header file.

Definition at line 406 of file stm32f1xx_hal_conf.h.

◆ DP83848_PHY_ADDRESS

#define DP83848_PHY_ADDRESS 0x01

DP83848 PHY Address.

Definition at line 216 of file stm32f1xx_hal_conf.h.

◆ ETH_RX_BUF_SIZE

#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE

buffer size for receive

Definition at line 208 of file stm32f1xx_hal_conf.h.

◆ ETH_RXBUFNB

#define ETH_RXBUFNB ((uint32_t)8)

8 Rx buffers of size ETH_RX_BUF_SIZE

Definition at line 210 of file stm32f1xx_hal_conf.h.

◆ ETH_TX_BUF_SIZE

#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE

buffer size for transmit

Definition at line 209 of file stm32f1xx_hal_conf.h.

◆ ETH_TXBUFNB

#define ETH_TXBUFNB ((uint32_t)4)

4 Tx buffers of size ETH_TX_BUF_SIZE

Definition at line 211 of file stm32f1xx_hal_conf.h.

◆ HAL_ADC_MODULE_ENABLED

#define HAL_ADC_MODULE_ENABLED

Enable module.

Definition at line 57 of file stm32f1xx_hal_conf.h.

◆ HAL_CAN_MODULE_ENABLED

#define HAL_CAN_MODULE_ENABLED

Enable module.

Definition at line 59 of file stm32f1xx_hal_conf.h.

◆ HAL_CEC_MODULE_ENABLED

#define HAL_CEC_MODULE_ENABLED

Enable module.

Definition at line 61 of file stm32f1xx_hal_conf.h.

◆ HAL_CORTEX_MODULE_ENABLED

#define HAL_CORTEX_MODULE_ENABLED

Enable module.

Definition at line 63 of file stm32f1xx_hal_conf.h.

◆ HAL_CRC_MODULE_ENABLED

#define HAL_CRC_MODULE_ENABLED

Enable module.

Definition at line 65 of file stm32f1xx_hal_conf.h.

◆ HAL_DAC_MODULE_ENABLED

#define HAL_DAC_MODULE_ENABLED

Enable module.

Definition at line 67 of file stm32f1xx_hal_conf.h.

◆ HAL_DMA_MODULE_ENABLED

#define HAL_DMA_MODULE_ENABLED

Enable module.

Definition at line 69 of file stm32f1xx_hal_conf.h.

◆ HAL_ETH_MODULE_ENABLED

#define HAL_ETH_MODULE_ENABLED

Enable module.

Definition at line 71 of file stm32f1xx_hal_conf.h.

◆ HAL_FLASH_MODULE_ENABLED

#define HAL_FLASH_MODULE_ENABLED

Enable module.

Definition at line 73 of file stm32f1xx_hal_conf.h.

◆ HAL_GPIO_MODULE_ENABLED

#define HAL_GPIO_MODULE_ENABLED

Enable module.

Definition at line 75 of file stm32f1xx_hal_conf.h.

◆ HAL_HCD_MODULE_ENABLED

#define HAL_HCD_MODULE_ENABLED

Enable module.

Definition at line 77 of file stm32f1xx_hal_conf.h.

◆ HAL_I2C_MODULE_ENABLED

#define HAL_I2C_MODULE_ENABLED

Enable module.

Definition at line 79 of file stm32f1xx_hal_conf.h.

◆ HAL_I2S_MODULE_ENABLED

#define HAL_I2S_MODULE_ENABLED

Enable module.

Definition at line 81 of file stm32f1xx_hal_conf.h.

◆ HAL_IRDA_MODULE_ENABLED

#define HAL_IRDA_MODULE_ENABLED

Enable module.

Definition at line 83 of file stm32f1xx_hal_conf.h.

◆ HAL_IWDG_MODULE_ENABLED

#define HAL_IWDG_MODULE_ENABLED

Enable module.

Definition at line 85 of file stm32f1xx_hal_conf.h.

◆ HAL_MODULE_ENABLED

#define HAL_MODULE_ENABLED

This is the list of modules to be used in the HAL driver.

Definition at line 55 of file stm32f1xx_hal_conf.h.

◆ HAL_NAND_MODULE_ENABLED

#define HAL_NAND_MODULE_ENABLED

Enable module.

Definition at line 87 of file stm32f1xx_hal_conf.h.

◆ HAL_NOR_MODULE_ENABLED

#define HAL_NOR_MODULE_ENABLED

Enable module.

Definition at line 89 of file stm32f1xx_hal_conf.h.

◆ HAL_PCCARD_MODULE_ENABLED

#define HAL_PCCARD_MODULE_ENABLED

Enable module.

Definition at line 91 of file stm32f1xx_hal_conf.h.

◆ HAL_PCD_MODULE_ENABLED

#define HAL_PCD_MODULE_ENABLED

Enable module.

Definition at line 93 of file stm32f1xx_hal_conf.h.

◆ HAL_PWR_MODULE_ENABLED

#define HAL_PWR_MODULE_ENABLED

Enable module.

Definition at line 95 of file stm32f1xx_hal_conf.h.

◆ HAL_RCC_MODULE_ENABLED

#define HAL_RCC_MODULE_ENABLED

Enable module.

Definition at line 97 of file stm32f1xx_hal_conf.h.

◆ HAL_RTC_MODULE_ENABLED

#define HAL_RTC_MODULE_ENABLED

Enable module.

Definition at line 99 of file stm32f1xx_hal_conf.h.

◆ HAL_SD_MODULE_ENABLED

#define HAL_SD_MODULE_ENABLED

Enable module.

Definition at line 101 of file stm32f1xx_hal_conf.h.

◆ HAL_SMARTCARD_MODULE_ENABLED

#define HAL_SMARTCARD_MODULE_ENABLED

Enable module.

Definition at line 103 of file stm32f1xx_hal_conf.h.

◆ HAL_SPI_MODULE_ENABLED

#define HAL_SPI_MODULE_ENABLED

Enable module.

Definition at line 105 of file stm32f1xx_hal_conf.h.

◆ HAL_SRAM_MODULE_ENABLED

#define HAL_SRAM_MODULE_ENABLED

Enable module.

Definition at line 107 of file stm32f1xx_hal_conf.h.

◆ HAL_TIM_MODULE_ENABLED

#define HAL_TIM_MODULE_ENABLED

Enable module.

Definition at line 109 of file stm32f1xx_hal_conf.h.

◆ HAL_UART_MODULE_ENABLED

#define HAL_UART_MODULE_ENABLED

Enable module.

Definition at line 111 of file stm32f1xx_hal_conf.h.

◆ HAL_USART_MODULE_ENABLED

#define HAL_USART_MODULE_ENABLED

Enable module.

Definition at line 113 of file stm32f1xx_hal_conf.h.

◆ HAL_WWDG_MODULE_ENABLED

#define HAL_WWDG_MODULE_ENABLED

Enable module.

Definition at line 115 of file stm32f1xx_hal_conf.h.

◆ HSE_STARTUP_TIMEOUT

#define HSE_STARTUP_TIMEOUT ((uint32_t)5000)

Time out for HSE start up, in ms

Definition at line 132 of file stm32f1xx_hal_conf.h.

◆ HSE_VALUE

#define HSE_VALUE ((uint32_t)8000000)

Adjust the value of External High Speed oscillator (HSE) used in your application.

This value is used by the RCC HAL module to compute the system frequency (when HSE is used as system clock source, directly or through the PLL).
Value of the External oscillator in Hz

Definition at line 127 of file stm32f1xx_hal_conf.h.

◆ HSI_VALUE

#define HSI_VALUE ((uint32_t)8000000)

Internal High Speed oscillator (HSI) value.

This value is used by the RCC HAL module to compute the system frequency (when HSI is used as system clock source, directly or through the PLL). Value of the Internal oscillator in Hz

Definition at line 141 of file stm32f1xx_hal_conf.h.

◆ LSE_STARTUP_TIMEOUT

#define LSE_STARTUP_TIMEOUT ((uint32_t)5000)

Time out for LSE start up, in ms

Definition at line 163 of file stm32f1xx_hal_conf.h.

◆ LSE_VALUE

#define LSE_VALUE ((uint32_t)32768)

External Low Speed oscillator (LSE) value.

< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature.
This value is used by the UART, RTC HAL module to compute the system frequency Value of the External oscillator in Hz

Definition at line 158 of file stm32f1xx_hal_conf.h.

◆ LSI_VALUE

#define LSI_VALUE ((uint32_t)40000)

Internal Low Speed oscillator (LSI) value.

Definition at line 148 of file stm32f1xx_hal_conf.h.

◆ MAC_ADDR0

#define MAC_ADDR0 2

Uncomment the line below to expanse the "assert_param" macro in the HAL drivers code.

MAC accress byte 0

Definition at line 195 of file stm32f1xx_hal_conf.h.

◆ MAC_ADDR1

#define MAC_ADDR1 0

MAC accress byte 1.

Definition at line 197 of file stm32f1xx_hal_conf.h.

◆ MAC_ADDR2

#define MAC_ADDR2 0

MAC accress byte 2.

Definition at line 199 of file stm32f1xx_hal_conf.h.

◆ MAC_ADDR3

#define MAC_ADDR3 0

MAC accress byte 3.

Definition at line 201 of file stm32f1xx_hal_conf.h.

◆ MAC_ADDR4

#define MAC_ADDR4 0

MAC accress byte 4.

Definition at line 203 of file stm32f1xx_hal_conf.h.

◆ MAC_ADDR5

#define MAC_ADDR5 0

MAC accress byte 5.

Definition at line 205 of file stm32f1xx_hal_conf.h.

◆ PHY_AUTONEGO_COMPLETE

#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020)

Auto-Negotiation process completed

Definition at line 243 of file stm32f1xx_hal_conf.h.

◆ PHY_AUTONEGOTIATION

#define PHY_AUTONEGOTIATION ((uint16_t)0x1000)

Enable auto-negotiation function

Definition at line 238 of file stm32f1xx_hal_conf.h.

◆ PHY_BCR

#define PHY_BCR ((uint16_t)0x00)

Transceiver Basic Control Register

Definition at line 229 of file stm32f1xx_hal_conf.h.

◆ PHY_BSR

#define PHY_BSR ((uint16_t)0x01)

Transceiver Basic Status Register

Definition at line 230 of file stm32f1xx_hal_conf.h.

◆ PHY_CONFIG_DELAY

#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF)

PHY Configuration delay.

Definition at line 220 of file stm32f1xx_hal_conf.h.

◆ PHY_DUPLEX_STATUS

#define PHY_DUPLEX_STATUS ((uint16_t)0x0004)

PHY Duplex mask

Definition at line 255 of file stm32f1xx_hal_conf.h.

◆ PHY_FULLDUPLEX_100M

#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100)

Set the full-duplex mode at 100 Mb/s

Definition at line 234 of file stm32f1xx_hal_conf.h.

◆ PHY_FULLDUPLEX_10M

#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100)

Set the full-duplex mode at 10 Mb/s

Definition at line 236 of file stm32f1xx_hal_conf.h.

◆ PHY_HALFDUPLEX_100M

#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000)

Set the half-duplex mode at 100 Mb/s

Definition at line 235 of file stm32f1xx_hal_conf.h.

◆ PHY_HALFDUPLEX_10M

#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000)

Set the half-duplex mode at 10 Mb/s

Definition at line 237 of file stm32f1xx_hal_conf.h.

◆ PHY_ISOLATE

#define PHY_ISOLATE ((uint16_t)0x0400)

Isolate PHY from MII

Definition at line 241 of file stm32f1xx_hal_conf.h.

◆ PHY_JABBER_DETECTION

#define PHY_JABBER_DETECTION ((uint16_t)0x0002)

Jabber condition detected

Definition at line 245 of file stm32f1xx_hal_conf.h.

◆ PHY_LINK_INTERRUPT

#define PHY_LINK_INTERRUPT ((uint16_t)0x2000)

PHY link status interrupt mask

Definition at line 261 of file stm32f1xx_hal_conf.h.

◆ PHY_LINK_STATUS

#define PHY_LINK_STATUS ((uint16_t)0x0001)

PHY Link mask

Definition at line 253 of file stm32f1xx_hal_conf.h.

◆ PHY_LINKED_STATUS

#define PHY_LINKED_STATUS ((uint16_t)0x0004)

Valid link established

Definition at line 244 of file stm32f1xx_hal_conf.h.

◆ PHY_LOOPBACK

#define PHY_LOOPBACK ((uint16_t)0x4000)

Select loop-back mode

Definition at line 233 of file stm32f1xx_hal_conf.h.

◆ PHY_MICR

#define PHY_MICR ((uint16_t)0x11)

MII Interrupt Control Register

Definition at line 250 of file stm32f1xx_hal_conf.h.

◆ PHY_MICR_INT_EN

#define PHY_MICR_INT_EN ((uint16_t)0x0002)

PHY Enable interrupts

Definition at line 257 of file stm32f1xx_hal_conf.h.

◆ PHY_MICR_INT_OE

#define PHY_MICR_INT_OE ((uint16_t)0x0001)

PHY Enable output interrupt events

Definition at line 258 of file stm32f1xx_hal_conf.h.

◆ PHY_MISR

#define PHY_MISR ((uint16_t)0x12)

MII Interrupt Status and Misc. Control Register

Definition at line 251 of file stm32f1xx_hal_conf.h.

◆ PHY_MISR_LINK_INT_EN

#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020)

Enable Interrupt on change of link status

Definition at line 260 of file stm32f1xx_hal_conf.h.

◆ PHY_POWERDOWN

#define PHY_POWERDOWN ((uint16_t)0x0800)

Select the power down mode

Definition at line 240 of file stm32f1xx_hal_conf.h.

◆ PHY_READ_TO

#define PHY_READ_TO ((uint32_t)0x0000FFFF)

?

Definition at line 223 of file stm32f1xx_hal_conf.h.

◆ PHY_RESET

#define PHY_RESET ((uint16_t)0x8000)

PHY Reset

Definition at line 232 of file stm32f1xx_hal_conf.h.

◆ PHY_RESET_DELAY

#define PHY_RESET_DELAY ((uint32_t)0x000000FF)

PHY Reset delay these values are based on a 1 ms Systick interrupt.

Definition at line 218 of file stm32f1xx_hal_conf.h.

◆ PHY_RESTART_AUTONEGOTIATION

#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200)

Restart auto-negotiation function

Definition at line 239 of file stm32f1xx_hal_conf.h.

◆ PHY_SPEED_STATUS

#define PHY_SPEED_STATUS ((uint16_t)0x0002)

PHY Speed mask

Definition at line 254 of file stm32f1xx_hal_conf.h.

◆ PHY_SR

#define PHY_SR ((uint16_t)0x10)

PHY status register Offset

Definition at line 249 of file stm32f1xx_hal_conf.h.

◆ PHY_WRITE_TO

#define PHY_WRITE_TO ((uint32_t)0x0000FFFF)

?

Definition at line 225 of file stm32f1xx_hal_conf.h.

◆ PREFETCH_ENABLE

#define PREFETCH_ENABLE 1

Enable flash prefetch.

Definition at line 179 of file stm32f1xx_hal_conf.h.

◆ TICK_INT_PRIORITY

#define TICK_INT_PRIORITY ((uint32_t)0x000F)

tick interrupt priority

Definition at line 175 of file stm32f1xx_hal_conf.h.

◆ USE_RTOS

#define USE_RTOS 0

Do not use the stm32 HAL's RTOS features. (btw: why?)

Definition at line 177 of file stm32f1xx_hal_conf.h.

◆ VDD_VALUE

#define VDD_VALUE ((uint32_t)3300)

This is the HAL system configuration section.

Value of VDD in mv

Definition at line 174 of file stm32f1xx_hal_conf.h.

Function Documentation

◆ SetInterruptPriority()

static void SetInterruptPriority	(	uint32_t	irq,
		uint8_t	priority
	)

inlinestatic

Definition at line 409 of file stm32f1xx_hal_conf.h.

Macros

Functions

Detailed Description

© COPYRIGHT(c) 2014 STMicroelectronics

Macro Definition Documentation

◆ assert_param

◆ DP83848_PHY_ADDRESS

◆ ETH_RX_BUF_SIZE

◆ ETH_RXBUFNB

◆ ETH_TX_BUF_SIZE

◆ ETH_TXBUFNB

◆ HAL_ADC_MODULE_ENABLED

◆ HAL_CAN_MODULE_ENABLED

◆ HAL_CEC_MODULE_ENABLED

◆ HAL_CORTEX_MODULE_ENABLED

◆ HAL_CRC_MODULE_ENABLED

◆ HAL_DAC_MODULE_ENABLED

◆ HAL_DMA_MODULE_ENABLED

◆ HAL_ETH_MODULE_ENABLED

◆ HAL_FLASH_MODULE_ENABLED

◆ HAL_GPIO_MODULE_ENABLED

◆ HAL_HCD_MODULE_ENABLED

◆ HAL_I2C_MODULE_ENABLED

◆ HAL_I2S_MODULE_ENABLED

◆ HAL_IRDA_MODULE_ENABLED

◆ HAL_IWDG_MODULE_ENABLED

◆ HAL_MODULE_ENABLED

◆ HAL_NAND_MODULE_ENABLED

◆ HAL_NOR_MODULE_ENABLED

◆ HAL_PCCARD_MODULE_ENABLED

◆ HAL_PCD_MODULE_ENABLED

◆ HAL_PWR_MODULE_ENABLED

◆ HAL_RCC_MODULE_ENABLED

◆ HAL_RTC_MODULE_ENABLED

◆ HAL_SD_MODULE_ENABLED

◆ HAL_SMARTCARD_MODULE_ENABLED

◆ HAL_SPI_MODULE_ENABLED

◆ HAL_SRAM_MODULE_ENABLED

◆ HAL_TIM_MODULE_ENABLED

◆ HAL_UART_MODULE_ENABLED

◆ HAL_USART_MODULE_ENABLED

◆ HAL_WWDG_MODULE_ENABLED

◆ HSE_STARTUP_TIMEOUT

◆ HSE_VALUE

◆ HSI_VALUE

◆ LSE_STARTUP_TIMEOUT

◆ LSE_VALUE

◆ LSI_VALUE

◆ MAC_ADDR0

◆ MAC_ADDR1

◆ MAC_ADDR2

◆ MAC_ADDR3

◆ MAC_ADDR4

◆ MAC_ADDR5

◆ PHY_AUTONEGO_COMPLETE

◆ PHY_AUTONEGOTIATION

◆ PHY_BCR

◆ PHY_BSR

◆ PHY_CONFIG_DELAY

◆ PHY_DUPLEX_STATUS

◆ PHY_FULLDUPLEX_100M

◆ PHY_FULLDUPLEX_10M

◆ PHY_HALFDUPLEX_100M

◆ PHY_HALFDUPLEX_10M

◆ PHY_ISOLATE

◆ PHY_JABBER_DETECTION

◆ PHY_LINK_INTERRUPT

◆ PHY_LINK_STATUS

◆ PHY_LINKED_STATUS

◆ PHY_LOOPBACK

◆ PHY_MICR

◆ PHY_MICR_INT_EN

◆ PHY_MICR_INT_OE

◆ PHY_MISR

◆ PHY_MISR_LINK_INT_EN

◆ PHY_POWERDOWN

◆ PHY_READ_TO

◆ PHY_RESET

◆ PHY_RESET_DELAY

◆ PHY_RESTART_AUTONEGOTIATION