Open Model Railroad Network (OpenMRN)
Loading...
Searching...
No Matches
stm32l4xx_hal_conf.h
Go to the documentation of this file.
1
20/* Define to prevent recursive inclusion -------------------------------------*/
21#ifndef __STM32L4xx_HAL_CONF_H
22#define __STM32L4xx_HAL_CONF_H
23
24#include <stdint.h>
25
26#ifdef __cplusplus
27 extern "C" {
28#endif
29
30/* Exported types ------------------------------------------------------------*/
31/* Exported constants --------------------------------------------------------*/
32
33/* ########################## Module Selection ############################## */
37#define HAL_MODULE_ENABLED
38#define HAL_ADC_MODULE_ENABLED
39#define HAL_CAN_MODULE_ENABLED
40/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
41#define HAL_COMP_MODULE_ENABLED
42#define HAL_CORTEX_MODULE_ENABLED
43#define HAL_CRC_MODULE_ENABLED
44#define HAL_CRYP_MODULE_ENABLED
45#define HAL_DAC_MODULE_ENABLED
46#define HAL_DMA_MODULE_ENABLED
47#define HAL_FIREWALL_MODULE_ENABLED
48#define HAL_FLASH_MODULE_ENABLED
49#define HAL_GPIO_MODULE_ENABLED
50#define HAL_I2C_MODULE_ENABLED
51#define HAL_IRDA_MODULE_ENABLED
52#define HAL_IWDG_MODULE_ENABLED
53#define HAL_LPTIM_MODULE_ENABLED
54#define HAL_MMC_MODULE_ENABLED
55#define HAL_OPAMP_MODULE_ENABLED
56#define HAL_PCD_MODULE_ENABLED
57#define HAL_PWR_MODULE_ENABLED
58#define HAL_QSPI_MODULE_ENABLED
59#define HAL_RCC_MODULE_ENABLED
60#define HAL_RNG_MODULE_ENABLED
61#define HAL_RTC_MODULE_ENABLED
62#define HAL_SAI_MODULE_ENABLED
63#define HAL_SMARTCARD_MODULE_ENABLED
64#define HAL_SMBUS_MODULE_ENABLED
65#define HAL_SPI_MODULE_ENABLED
66#define HAL_SWPMI_MODULE_ENABLED
67#define HAL_TIM_MODULE_ENABLED
68#define HAL_TSC_MODULE_ENABLED
69#define HAL_UART_MODULE_ENABLED
70#define HAL_USART_MODULE_ENABLED
71#define HAL_WWDG_MODULE_ENABLED
72
73
74/* ########################## Oscillator Values adaptation ####################*/
80extern const uint32_t HSEValue;
81#define HSE_VALUE HSEValue
82
83#if !defined (HSE_STARTUP_TIMEOUT)
84 #define HSE_STARTUP_TIMEOUT 100U
85#endif /* HSE_STARTUP_TIMEOUT */
86
91#if !defined (MSI_VALUE)
92 #define MSI_VALUE 4000000U
93#endif /* MSI_VALUE */
94
100#if !defined (HSI_VALUE)
101 #define HSI_VALUE 16000000U
102#endif /* HSI_VALUE */
103
111#if !defined (HSI48_VALUE)
112 #define HSI48_VALUE 48000000U
114#endif /* HSI48_VALUE */
115
119#if !defined (LSI_VALUE)
120 #define LSI_VALUE 32000U
121#endif /* LSI_VALUE */
128#if !defined (LSE_VALUE)
129 #define LSE_VALUE 32768U
130#endif /* LSE_VALUE */
131
132#if !defined (LSE_STARTUP_TIMEOUT)
133 #define LSE_STARTUP_TIMEOUT 5000U
134#endif /* HSE_STARTUP_TIMEOUT */
135
141#if !defined (EXTERNAL_SAI1_CLOCK_VALUE)
142 #define EXTERNAL_SAI1_CLOCK_VALUE 48000U
143#endif /* EXTERNAL_SAI1_CLOCK_VALUE */
144
150#if !defined (EXTERNAL_SAI2_CLOCK_VALUE)
151 #define EXTERNAL_SAI2_CLOCK_VALUE 48000U
152#endif /* EXTERNAL_SAI2_CLOCK_VALUE */
153
154/* Tip: To avoid modifying this file each time you need to use different HSE,
155 === you can define the HSE value in your toolchain compiler preprocessor. */
156
157/* ########################### System Configuration ######################### */
161#define VDD_VALUE 3300U
162#define TICK_INT_PRIORITY 0x0FU
163#define USE_RTOS 0U
164#define PREFETCH_ENABLE 0U
165#define INSTRUCTION_CACHE_ENABLE 1U
166#define DATA_CACHE_ENABLE 1U
167
168/* ########################## Assert Selection ############################## */
173/* #define USE_FULL_ASSERT 1U */
174
175/* ################## SPI peripheral configuration ########################## */
176
177/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
178 * Activated: CRC code is present inside driver
179 * Deactivated: CRC code cleaned from driver
180 */
181
182#define USE_SPI_CRC 1U
183
184/* Includes ------------------------------------------------------------------*/
189#ifdef HAL_RCC_MODULE_ENABLED
190 #include "stm32l4xx_hal_rcc.h"
191#endif /* HAL_RCC_MODULE_ENABLED */
192
193#ifdef HAL_GPIO_MODULE_ENABLED
194 #include "stm32l4xx_hal_gpio.h"
195#endif /* HAL_GPIO_MODULE_ENABLED */
196
197#ifdef HAL_DMA_MODULE_ENABLED
198 #include "stm32l4xx_hal_dma.h"
199#endif /* HAL_DMA_MODULE_ENABLED */
200
201#ifdef HAL_CORTEX_MODULE_ENABLED
202 #include "stm32l4xx_hal_cortex.h"
203#endif /* HAL_CORTEX_MODULE_ENABLED */
204
205#ifdef HAL_ADC_MODULE_ENABLED
206 #include "stm32l4xx_hal_adc.h"
207#endif /* HAL_ADC_MODULE_ENABLED */
208
209#ifdef HAL_CAN_MODULE_ENABLED
210 #include "stm32l4xx_hal_can.h"
211#endif /* HAL_CAN_MODULE_ENABLED */
212
213#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
214 #include "Legacy/stm32l4xx_hal_can_legacy.h"
215#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
216
217#ifdef HAL_COMP_MODULE_ENABLED
218 #include "stm32l4xx_hal_comp.h"
219#endif /* HAL_COMP_MODULE_ENABLED */
220
221#ifdef HAL_CRC_MODULE_ENABLED
222 #include "stm32l4xx_hal_crc.h"
223#endif /* HAL_CRC_MODULE_ENABLED */
224
225#ifdef HAL_CRYP_MODULE_ENABLED
226 #include "stm32l4xx_hal_cryp.h"
227#endif /* HAL_CRYP_MODULE_ENABLED */
228
229#ifdef HAL_DAC_MODULE_ENABLED
230 #include "stm32l4xx_hal_dac.h"
231#endif /* HAL_DAC_MODULE_ENABLED */
232
233#ifdef HAL_FIREWALL_MODULE_ENABLED
234 #include "stm32l4xx_hal_firewall.h"
235#endif /* HAL_FIREWALL_MODULE_ENABLED */
236
237#ifdef HAL_FLASH_MODULE_ENABLED
238 #include "stm32l4xx_hal_flash.h"
239#endif /* HAL_FLASH_MODULE_ENABLED */
240
241#ifdef HAL_I2C_MODULE_ENABLED
242 #include "stm32l4xx_hal_i2c.h"
243#endif /* HAL_I2C_MODULE_ENABLED */
244
245#ifdef HAL_IWDG_MODULE_ENABLED
246 #include "stm32l4xx_hal_iwdg.h"
247#endif /* HAL_IWDG_MODULE_ENABLED */
248
249#ifdef HAL_LPTIM_MODULE_ENABLED
250#include "stm32l4xx_hal_lptim.h"
251#endif /* HAL_LPTIM_MODULE_ENABLED */
252
253#ifdef HAL_MMC_MODULE_ENABLED
254#include "stm32l4xx_hal_mmc.h"
255#endif /* HAL_MMC_MODULE_ENABLED */
256
257#ifdef HAL_OPAMP_MODULE_ENABLED
258#include "stm32l4xx_hal_opamp.h"
259#endif /* HAL_OPAMP_MODULE_ENABLED */
260
261#ifdef HAL_PWR_MODULE_ENABLED
262 #include "stm32l4xx_hal_pwr.h"
263#endif /* HAL_PWR_MODULE_ENABLED */
264
265#ifdef HAL_QSPI_MODULE_ENABLED
266 #include "stm32l4xx_hal_qspi.h"
267#endif /* HAL_QSPI_MODULE_ENABLED */
268
269#ifdef HAL_RNG_MODULE_ENABLED
270 #include "stm32l4xx_hal_rng.h"
271#endif /* HAL_RNG_MODULE_ENABLED */
272
273#ifdef HAL_RTC_MODULE_ENABLED
274 #include "stm32l4xx_hal_rtc.h"
275#endif /* HAL_RTC_MODULE_ENABLED */
276
277#ifdef HAL_SAI_MODULE_ENABLED
278 #include "stm32l4xx_hal_sai.h"
279#endif /* HAL_SAI_MODULE_ENABLED */
280
281#ifdef HAL_SMBUS_MODULE_ENABLED
282 #include "stm32l4xx_hal_smbus.h"
283#endif /* HAL_SMBUS_MODULE_ENABLED */
284
285#ifdef HAL_SPI_MODULE_ENABLED
286 #include "stm32l4xx_hal_spi.h"
287#endif /* HAL_SPI_MODULE_ENABLED */
288
289#ifdef HAL_SWPMI_MODULE_ENABLED
290 #include "stm32l4xx_hal_swpmi.h"
291#endif /* HAL_SWPMI_MODULE_ENABLED */
292
293#ifdef HAL_TIM_MODULE_ENABLED
294 #include "stm32l4xx_hal_tim.h"
295#endif /* HAL_TIM_MODULE_ENABLED */
296
297#ifdef HAL_TSC_MODULE_ENABLED
298 #include "stm32l4xx_hal_tsc.h"
299#endif /* HAL_TSC_MODULE_ENABLED */
300
301#ifdef HAL_UART_MODULE_ENABLED
302 #include "stm32l4xx_hal_uart.h"
303#endif /* HAL_UART_MODULE_ENABLED */
304
305#ifdef HAL_USART_MODULE_ENABLED
306 #include "stm32l4xx_hal_usart.h"
307#endif /* HAL_USART_MODULE_ENABLED */
308
309#ifdef HAL_IRDA_MODULE_ENABLED
310 #include "stm32l4xx_hal_irda.h"
311#endif /* HAL_IRDA_MODULE_ENABLED */
312
313#ifdef HAL_SMARTCARD_MODULE_ENABLED
314 #include "stm32l4xx_hal_smartcard.h"
315#endif /* HAL_SMARTCARD_MODULE_ENABLED */
316
317#ifdef HAL_WWDG_MODULE_ENABLED
318 #include "stm32l4xx_hal_wwdg.h"
319#endif /* HAL_WWDG_MODULE_ENABLED */
320
321#ifdef HAL_PCD_MODULE_ENABLED
322 #include "stm32l4xx_hal_pcd.h"
323#endif /* HAL_PCD_MODULE_ENABLED */
324
325/* Exported macro ------------------------------------------------------------*/
326#ifdef USE_FULL_ASSERT
335 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
336/* Exported functions ------------------------------------------------------- */
337 void assert_failed(uint8_t *file, uint32_t line);
338#else
339 #define assert_param(expr) ((void)0U)
340#endif /* USE_FULL_ASSERT */
341
342 static inline void SetInterruptPriority(uint32_t irq, uint8_t priority)
343 {
344 NVIC_SetPriority((IRQn_Type)irq, priority >> (8U - __NVIC_PRIO_BITS));
345 }
346
347#ifdef __cplusplus
348}
349#endif
350
351#endif /* __STM32L4xx_HAL_CONF_H */
352
353
354/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
HSEValue
const uint32_t HSEValue
Adjust the value of External High Speed oscillator (HSE) used in your application.