DialThrottle

Parts list

Everything needed to build one throttle.

One throttle, as built. Every line is stocked at Digi-Key, and the quantities are per unit.

QtyPartDescriptionDigi-Key
1K130-V11M5DIAL V1.12221-K130-V11-ND
115290QWIIC KEYPAD - 12 BUTTON1568-15290-ND
115109QWIIC TO I2C GROVE CABLE 150MM1568-15109-ND
1LION-1865-34BATTERY LITH-ION 3.7V 3.4AH 18653145-LION-1865-34-ND
1BH-18650-PCBATTERY HOLDER 18650 PC PINBH-18650-PC-ND
13922MOLEX PICO BLADE 2-PIN CABLE - 21528-2732-ND
1FE-USB2CC-PM-6IN6inch USB2-C to C Panel M/F5600-FE-USB2CC-PM-6IN-ND

What each part is for

  • M5Dial is the whole throttle: an ESP32-S3, a round 240×240 touchscreen, a rotary encoder with a push button, an RFID reader and a speaker in one enclosure.
  • Qwiic keypad and cable add the function, turnout and loco-select keys. The throttle works without them, and picks one up whenever it is plugged in.
  • 18650 cell, holder and Pico Blade cable make it cordless. The Dial charges the cell over USB-C. The cable matches the Dial’s 1.25 mm 2-pin battery connector, so check the polarity against the case before the first connection.
  • Panel-mount USB-C cable brings the Dial’s USB port out to the edge of the case, for charging and reflashing without opening it.

A printable case is in case/ in the repository, as an STL with the FreeCAD source beside it. It is designed so all parts mount with M2 screws without threaded inserts.

Optional extras

None of these are in the list above; all are described elsewhere in these docs.

AddForSee
Two 100 kΩ resistorsBattery voltage divider, which the gauge needsBattery gauge
Two more 100 kΩ resistorsSensing external power on the 5 V input railCharging and power source
One wire to the charger’s CHRG pinShowing charge stateCharging and power source
RFID tags, 13.56 MHzSelecting a loco by tagRFID